SafeSequence › UK Safety Template Library › Confined Spaces › Sub-Surface Sump Pump Retrieval & Confined Space Entry
Verified UK RAMS Standard • Confined Spaces

Sub-Surface Sump Pump Retrieval & Confined Space Entry (RAMS Template & 5x5 Risk Assessment)

This Risk Assessment and Method Statement (RAMS) provides comprehensive safety controls for sub-surface sump pump retrieval operations involving confined space entry. The document addresses the significant hazards associated with working in below-ground sumps including oxygen deficiency, toxic atmospheres, engulfment risks, and mechanical hazards from pump equipment. All work must comply with the Confined Spaces Regulations 1997 (L101), Provision and Use of Work Equipment Regulations 1998, and Health and Safety at Work etc. Act 1974. Entry shall only be permitted following robust atmospheric testing, implementation of permit-to-work systems, and deployment of trained confined space operatives with appropriate rescue arrangements. This RAMS mandates engineering controls including forced ventilation, electrical isolation (LOTO), and continuous gas monitoring throughout the operation. All personnel must hold valid confined space entry certification (CA4) and emergency rescue training.

Statutory FrameworkConfined Spaces Regulations 1997 (L101), PUWER 1998, HASAWA 1974
ClassificationNot applicable - This RAMS covers mechanical retrieval operations in confined spaces. However, operatives must be aware that sump environments may contain residual chemicals, sewage, or hydrocarbon contaminants. Any identified substances must be assessed under COSHH 2002 (as amended). Hydrogen sulphide (H2S - UN1053, GHS06/GHS09) and methane (UN1971, GHS02/GHS04) are common sump atmosphere hazards. Atmospheric monitoring must detect oxygen (target 20.9%), LEL (Lower Explosive Limit <10%), H2S (<10ppm), CO (<35ppm), and CO2 (<0.5%). Material Safety Data Sheets must be obtained for any pump fluids or residues encountered.
Required Plant / Kit4-gas confined space monitor (O2, LEL, H2S, CO) with audible alarms and datalogging capability • Portable forced ventilation fan (min. 10 air changes/hour) with flexible ducting and explosion-proof motor • Tripod gantry with SWL-rated rescue winch, fall arrest davit arm, and 3:1 mechanical advantage retrieval system • Electrical isolation lockout kit (LOTO) with multi-lock hasp, danger tags, and circuit verification device • Intrinsically safe LED lighting (ATEX rated Zone 1) with battery backup and minimum 500 lux illumination
Review Cycle12 Months / Post-Incident
Instant AI Customization or Free Blank Word (.doc) Download

Need this RAMS customized with your Company Name, Site Postcode & Nearest A&E Hospital?

Dictate your site specifics on your phone in 45 seconds to auto-compile a signed PDF—or download our free blank Word (.doc) shell below.

Auto-Fill via Voice / CLP (45s)

2. 5×5 Hazard Risk Assessment Matrix (HASAWA 1974 / MHSWR 1999)

Identified Hazard & Harm Initial Risk (L×S) Mandatory Engineering, Isolation & Procedural Controls Residual Risk
1. Oxygen-deficient or toxic atmosphere (H2S, CO, methane) within sub-surface sump chamber
Harm: Asphyxiation, loss of consciousness, toxic gas poisoning, explosion from flammable gas accumulation leading to fatality
5 × 5 = 25 Implement Confined Spaces Regulations 1997 permit-to-work system. Conduct pre-entry atmospheric testing at top, middle, and bottom levels using calibrated 4-gas monitor. Deploy forced ventilation (min. 10 ACH) for 20 minutes prior to entry and maintain continuously. Continuous personal gas monitoring with audible alarms (O2: 19.5-23%, LEL <10%, H2S <10ppm, CO <35ppm). Standby person with BA set positioned at entry point. Emergency rescue plan with practiced drills. No entry if atmosphere cannot be made safe - use remote retrieval methods. 2 × 4 = 8
2. Electrical shock from energised pump motor, control circuits, or submerged cabling during retrieval
Harm: Electrocution causing cardiac arrest, severe burns, or secondary drowning if incapacitated in standing water - potential fatality
4 × 5 = 20 Full electrical isolation (LOTO) of pump supply at distribution board with individual padlocks applied by Authorised Person (Electricity at Work Regulations 1989). Verify dead using proprietary voltage detector and prove unit functional before/after. Display danger notices at isolation point. Drain sump to minimum practicable level before entry. Use 110V CTE or battery-powered tools only (no 230V). Inspect all cables for damage before handling. Competent electrician to supervise disconnection of pump terminals. Maintain isolation throughout operation until pump fully removed and isolated. 1 × 5 = 5
3. Falls from height during access/egress via vertical ladder or sudden engulfment in rising water/sludge
Harm: Major trauma from fall onto hard surfaces/equipment below, or drowning from engulfment in uncontrolled liquid ingress
4 × 4 = 16 Inspect fixed ladder for structural integrity (LOLER 1998 compliance). Entrant to wear full body harness (BS EN 361) connected to tripod-mounted rescue winch with constant tension. Standby person to monitor lifeline at all times. Isolate all inflow sources (valves locked shut, upstream pumps isolated). Monitor sump level continuously - establish trigger level for immediate evacuation. Emergency retrieval system tested under load before entry. Maximum working time 30 minutes with welfare breaks topside. Three-point contact maintained on ladder during access/egress. 2 × 3 = 6
4. Manual handling injuries during pump lifting (typical sump pumps 50-150kg) in confined posture with restricted access
Harm: Acute back injury, trapped/crushed fingers, shoulder/knee strain from awkward lifting in confined space, potential long-term musculoskeletal disorders
5 × 3 = 15 Conduct Manual Handling Operations Regulations 1992 assessment. Use mechanical lifting aids - attach pump to tripod winch using rated slings/shackles (LOLER examined). Disconnect pump from base fixings and pipework before lifting. Guide pump during mechanical lift - no manual lifting of full weight. Two-person team for guidance and stabilisation. Pre-task briefing on hand signals and coordination. Ensure adequate headroom and clearance. Use ergonomic tools for bolt removal. Rotate tasks to prevent fatigue. Operatives to hold valid manual handling training certification. 3 × 2 = 6
5. Biological hazards from sewage, stagnant water, leptospirosis (Weil's disease), legionella, or sharps/debris in sump
Harm: Infection causing severe illness (leptospirosis can be fatal), respiratory disease from legionella, puncture wounds leading to sepsis
4 × 3 = 12 COSHH assessment completed identifying biological agents. Mandatory chemical-resistant PPE (BS EN 374 gloves, S5 boots, coveralls). Respiratory protection (minimum FFP3 or powered respirator) to prevent aerosol inhalation. Cover all cuts/abrasions with waterproof dressings. Strict hygiene protocols - no eating/drinking/smoking until decontamination complete. Provide wash station with antibacterial soap and clean water at surface. Immediate first aid for any puncture wounds with medical review. Operatives briefed on Weil's disease symptoms with wallet cards. Hepatitis A/B and tetanus vaccinations confirmed current. Sharps disposal container available. 2 × 2 = 4

3. Step-by-Step Safe Sequence of Operations & Hold-Points

1

Site Setup, Isolation, and Atmospheric Testing

Pre-Entry Preparation

Establish 3-metre exclusion zone around sump access with barriers and signage. Conduct toolbox talk and confirm all operatives hold valid CA4 confined space certification. Remove sump cover and allow passive ventilation for 10 minutes. Implement permit-to-work system with Authorised Person signature. Perform electrical isolation (LOTO) of pump at distribution board - apply personal padlocks and verify dead. Isolate all inflow valves and lock in closed position. Erect tripod gantry over opening ensuring stable footing on level ground. Conduct initial atmospheric testing at top, middle, and bottom levels using calibrated 4-gas monitor - record readings on permit. Deploy forced ventilation fan with ducting to sump base - operate for minimum 20 minutes achieving 10+ air changes per hour. Re-test atmosphere and confirm entry-safe parameters (O2: 19.5-23%, LEL <10%, H2S <10ppm, CO <35ppm). Set up intrinsically safe lighting. Prepare emergency rescue equipment and BA set at entry point.

Critical Hold-Point: HOLD POINT: Entry strictly prohibited until atmosphere confirmed safe by competent person and recorded on permit-to-work. If safe atmosphere cannot be achieved, abort confined space entry and use remote retrieval methods. Permit must be signed by both entrant and standby person.
2

Controlled Entry with Continuous Monitoring

Entry and Initial Assessment

Entrant to don full body harness, respiratory protection (confirm seal check), chemical-resistant PPE, and personal gas monitor with audible alarms. Attach harness to tripod rescue winch via shock-absorbing lanyard - standby person to maintain constant tension on lifeline. Establish communication protocol (verbal and hand signals) and test emergency retrieval system under load. Entrant descends ladder maintaining three-point contact while standby person monitors lifeline and gas readings. Forced ventilation to remain operational throughout. Upon reaching sump floor, entrant conducts visual inspection of pump condition, pipework connections, and working area. Identify any unexpected hazards (standing water depth, debris, structural defects) and communicate to topside supervisor. Confirm adequate working space and lighting. Monitor personal gas detector continuously - any alarm triggers immediate evacuation.

Critical Hold-Point: HOLD POINT: Standby person must maintain visual/verbal contact with entrant at all times. If communication lost or gas alarm activates, initiate immediate emergency retrieval - standby person must NOT enter without BA set and additional rescue team.
3

Isolation Verification and Mechanical Disconnection

Pump Disconnection

Re-verify electrical isolation using voltage detector on pump terminals - test device before and after use. Disconnect electrical supply cables from pump motor terminal box using insulated tools - cap exposed conductors. Photograph cable configuration for reinstallation reference. Identify and isolate discharge pipework - close isolation valves if present. Disconnect flanged or threaded pipe connections using appropriate spanners - be prepared for residual fluid release (have absorbent materials ready). Disconnect any guide rail or support brackets securing pump to sump structure. Remove anchor bolts or base fixings - place removed fasteners in container to prevent loss. Inspect pump lifting eyes or attachment points for integrity. Attach rated lifting sling/shackle (SWL >2x pump weight) to pump - ensure secure connection and balanced lift point. Clear any debris or obstructions from lift path.

Critical Hold-Point: CRITICAL: Assume all electrical components live until proven dead with voltage detector. Any unexpected resistance during disconnection may indicate seized components - do not force. Residual pressure in pipework can cause sudden fluid release - position body clear of flanges during disconnection.
4

Mechanical Lifting and Extraction

Pump Retrieval

Signal to topside operator that pump is ready for lifting. Entrant to guide pump during initial lift, ensuring it clears base mounting and pipework stubs without snagging. Topside operator to operate tripod winch smoothly - no jerking or sudden movements. Entrant maintains hands clear of pinch points between pump and sump walls. Communicate continuously during lift using agreed signals. As pump rises, entrant inspects for any trailing cables or hoses that may snag. Once pump clears entrant's head height, entrant moves to safe position away from lift path. Continue lift until pump reaches surface level. Topside team to guide pump clear of sump opening and lower onto prepared area with absorbent matting. Secure pump to prevent rolling. Inspect sling and shackle for damage before reuse.

Critical Hold-Point: HOLD POINT: Entrant must maintain clear communication during entire lift. If pump becomes snagged or unstable, halt lift immediately and reassess. Entrant must never position themselves directly beneath suspended load. Maximum lift weight must not exceed tripod/winch SWL rating.
5

Sump Inspection and Housekeeping

Post-Retrieval Inspection

With pump removed, entrant conducts inspection of sump chamber for structural integrity, cracks, or defects. Photograph sump base and walls for maintenance records. Check condition of inlet/outlet pipework stubs and blanking requirements. Remove any debris, tools, or materials introduced during operation - leave sump clean. Inspect fixed ladder and any permanent fixtures for damage. Take final atmospheric readings and record on permit. Confirm no tools or equipment left in sump (tool count verification). Prepare for exit - ensure all tasks complete and area safe for closure.

Critical Hold-Point: CRITICAL: Account for all tools and equipment before exit - dropped items can create future hazards or block drainage. Do not extend working time beyond 30 minutes without exit for welfare break and atmosphere re-assessment.
6

Safe Egress, Decontamination, and Permit Closure

Exit and Closeout

Entrant ascends ladder maintaining three-point contact with standby person monitoring lifeline. Upon surface exit, entrant moves to decontamination area. Remove and inspect PPE for damage - dispose of single-use items in designated waste bags. Wash hands and exposed skin thoroughly with antibacterial soap before removing respiratory protection. Conduct post-task debrief identifying any issues or near-misses. Complete permit-to-work closeout section with actual times and final atmospheric readings. Remove LOTO devices only after confirming all personnel clear and sump secured. Replace sump cover and secure - reinstate barriers/signage as required. Remove tripod and equipment - inspect and store correctly. Ensure pump is appropriately stored/transported for repair/disposal. File completed permit and atmospheric test records. Monitor operatives for 7 days for any symptoms of biological exposure (Weil's disease awareness).

Critical Hold-Point: HOLD POINT: Permit must be formally closed by Authorised Person before electrical re-energisation. Any symptoms of illness (flu-like, jaundice, headache) within 7 days must trigger immediate medical review with disclosure of sewage/confined space exposure.

Emergency Rescue, First Aid & Spill Protocol

EMERGENCY PROCEDURES: In event of entrant collapse, distress, or gas alarm activation: (1) Standby person to raise alarm immediately - DO NOT ENTER without BA set and rescue team; (2) Activate emergency services (999) stating 'confined space emergency'; (3) If entrant conscious and able, instruct immediate self-evacuation via ladder; (4) If entrant incapacitated, standby person to don BA set (if trained and available) or await Fire & Rescue Service - operate tripod winch to retrieve casualty vertically using harness attachment; (5) Once at surface, move casualty to fresh air and commence first aid/CPR as required; (6) Treat for gas exposure - high-flow oxygen if available; (7) Preserve scene for HSE investigation if serious injury/fatality. FIRST AID: Minimum two First Aiders with current HSE-approved certification must be present on site. First aid kit to include eye wash, burns dressings, trauma kit, and resuscitation equipment. Nearest A&E: [SITE-SPECIFIC]. Occupational Health to be notified of any biological exposure within 24 hours. All personnel to carry Weil's disease awareness cards. Any puncture wounds to receive immediate medical assessment due to contamination risk. Defibrillator (AED) to be available at surface level.

4. UK HSE Compliance FAQs: Sub-Surface Sump Pump Retrieval & Confined Space Entry

What are the legal requirements under the Confined Spaces Regulations 1997 before entering a sump for pump retrieval, and can we avoid entry altogether?

The Confined Spaces Regulations 1997 (L101) impose a strict hierarchy: Regulation 4 requires employers to AVOID entry to confined spaces wherever reasonably practicable by conducting work from outside or eliminating the need for entry. You must first explore remote retrieval methods (e.g., extended lifting chains, remote disconnection tools, or pump replacement via top-access designs). Only if entry is unavoidable can you proceed, but you must then implement: (a) a formal permit-to-work system with competent person authorisation; (b) comprehensive risk assessment identifying all hazards (atmospheric, engulfment, access); (c) adequate atmospheric testing and ventilation to ensure safe breathing atmosphere; (d) appropriate emergency rescue arrangements that do not rely on entry by rescuers; (e) trained and competent operatives (typically CA4 confined space certification); and (f) suitable equipment including gas monitors, PPE, and rescue equipment. HSE enforcement prioritises avoidance - you must document why entry is the only option and demonstrate all alternatives were considered. Failure to comply can result in Improvement/Prohibition Notices or prosecution under HASAWA Section 33.

What specific atmospheric testing parameters and frequencies are required for sump pump retrieval under UK HSE guidance, and who is competent to conduct this testing?

HSE guidance (HSG258 'Controlling health risks from the use of confined spaces') mandates testing for four critical parameters: (1) Oxygen - must be 20.9% (acceptable range 19.5-23%); (2) Flammable gases - measured as % Lower Explosive Limit (LEL), must be <10% LEL; (3) Toxic gases - particularly hydrogen sulphide (H2S <10ppm) and carbon monoxide (CO <35ppm), with carbon dioxide (CO2 <0.5%) also relevant in sewage environments. Testing must be conducted: (a) at multiple levels (top, middle, bottom) as gases stratify by density; (b) before initial entry after 20 minutes forced ventilation; (c) continuously during occupation using personal monitors with audible alarms; (d) after any work break or if ventilation interrupted. Instruments must be 'bump tested' daily and fully calibrated per manufacturer's schedule (typically 6-monthly) with certificates available. Only a 'competent person' (defined by HSE as someone with training, knowledge, and experience in atmospheric testing and confined space hazards) may authorise entry based on test results. This typically requires formal confined space supervisor training (e.g., City & Guilds 6150-04) and understanding of gas behaviour. Datalogging monitors provide audit trail for compliance demonstration.

What are the specific requirements for emergency rescue arrangements when working in a sump, and can our standby person enter to perform a rescue if needed?

Regulation 5 of the Confined Spaces Regulations 1997 mandates that emergency arrangements must be in place BEFORE entry, and critically, these arrangements must not rely on entry by rescuers into the hazardous atmosphere. For vertical sump entry, this requires: (1) Entrant wearing full body harness (BS EN 361) connected to a tripod-mounted rescue winch capable of vertical retrieval without entry; (2) Standby person positioned at entry point maintaining constant visual/verbal contact and able to operate winch; (3) Immediate access to breathing apparatus (BA) and rescue equipment; (4) Practiced emergency drills so rescue can be executed within 'golden minute'; (5) Emergency services (Fire & Rescue) pre-notified of confined space work if complex rescue anticipated. The standby person must NOT enter the space to perform rescue unless: (a) they are wearing BA set providing breathable air; (b) a third person is present to summon help and monitor; (c) they are trained in BA use and confined space rescue. HSE investigations into confined space fatalities consistently show 'would-be rescuers' becoming secondary casualties when entering without protection. Your rescue plan must assume the entrant is incapacitated and cannot self-rescue - vertical retrieval via harness/winch is the gold standard for sump work. Document and practice your rescue procedure as part of the permit-to-work system.

5. Operative Toolbox Talk & Competent Person Sign-Off Register

Competent Person & Operative Declaration: By signing below, the Site Supervisor confirms this assessment has been adapted and verified for actual site conditions, and operatives confirm they have attended the pre-start Toolbox Talk for Sub-Surface Sump Pump Retrieval & Confined Space Entry and will follow the safe system of work.

Operative / Supervisor Name Trade / Role & CSCS No. Signature Date & Time
1. (Site Supervisor):     
2.     
3.     
4.     
5.     
6.     

Related UK Safety Templates & Risk Assessments